Solar Panel System Installation Guide for Newly Built Homes

Solar Panel System Installation Guide for Newly Built Homes

Installing solar panels and making use of solar energy over the conventional form of electricity is much more cost-saving and environment-friendly. If you are thinking to get a solar panel system installed in your newly built home, then you need to be acquainted with a few things before opting for the installation.

Here is a solar installation guide for your newly developed home that you can follow to get maximum benefits from your solar panel system.

Step 1: Opt for the Proper Solution Suitable for Your Place

While opting for an entire solar panel system for your newly-built house, choose the proper solutions as per your needs. You need to decide between the off-grid and on-grid solutions.

To have power back up in space, installation of off-grid solar is the best. But if you want to have a reduced electricity bill for every month, then opt for the on-grid solar system without any doubt.

Step 2: Consider the Rooftop Strength Before Installation

If you are planning of installing a residential solar system on the rooftop of your newly-made house, then you need to consider its rooftop strength before installing the panel. The solar installation panels and solar stands are quite heavy.

Your rooftop needs proper strength to withstand such heaviness. Make sure the rooftop is 6-inches by depth so that the fastener easily fits in without damaging the rooftop. Therefore, the fastener needs a stronger base for its proper fixing.

However, you don’t need to worry much if you are installing your solar panel system on your lawn.

Step 3: Consider the Direction for Your Solar Panel Face

The mounting structure of the solar panel system works as the base for the performance of the solar panel. Opt for a sturdy and well-fastened system to install on your new building. To get optimized performance all the time, make sure that the solar panel is set in the proper direction.

The best direction for facing the solar panel is south, as it receives the maximum of sunlight. Try to avoid the north as it does not receive the ultimate of sun rays.

Step 4: Make Sure the Angle is Right for the Solar Panel System Installation

The angle at which the solar panel will be affixed matters a lot in deriving the maximum of sun rays to produce an adequate amount of energy. Decide the tilt angle for your solar panel according to the latitude of the location you are installing the device at.

According to the general beliefs, placement of the module with a tilted angle is equivalent to the latitude of that place and can generate a lot of energy and get the best output. 30-degree installation of the solar panels is vital to absorb the maximum amount of energy.

Step 5: Make a Proper Wiring Connection

Those who are installing a new solar panel system in their building need a PVC pipe with a 2-inches diameter for housing both the earthing and solar wire. The earthing connection should be at a distance of 1-meter from the construction wall.

For a standard house, it is recommended to have a 1-kW solar system. A proper depth of the pipe is needed to fit all the wires within it and have a very sturdy construction of the wiring. Also, it is advised to have a three-phase meter for enhanced power consumption.


As a homeowner, if you are thinking of installing a solar panel system in your newly-built system, then availing the services of the best solar panel solution company can help you much. Make sure that you are using high-end products for easy installation along with the proper assembly and set-up to get the best of energy at your place.

You can seek help from GoRunSolar, as they provide you with the best quality solutions with the proper installation of the solar panels in your new residence.

Leave a Reply

Your email address will not be published. Required fields are marked *


Get A Free Quote. Click Here